Camtec HSEUiREG07201 Series Manual Download | Manualshive

Page: 13 / 15

background image

HSEUiREG07201(R2) MANUAL

Camtec Power Supplies GmbH - Gewerbestrasse 30 - DE-76327 Pfinztal / Germany

P.13/15 (03/2017.02.2)

Tel. +49 (721) 46596 - 0 Fax +49 (721) 46596 - 77

www.camtec-gmbh.com

-

[email protected]

(Subject to alterations. This product is not designed to be used in applications such as life support systems wherein a failure or malfunction could result in injury or death)

Mechanics & Installation Instruction of the HSEUiREG

Stable metal/aluminium housing IP20. To allow adequate convection, a free air space of 50mm (top/bottom)
and 10mm (sidewalls) is required; and for active devices 15mm space from the sidewalls. For proper air
convection it is necessary to install the HSEUiREG. One can use the DIN-Rail installation (equiped standard)
with our patented 35mm DIN-Rail bracket according to EN60715. It is easy to mount/dismount while snaping it
onto the 35mm DIN-Rail - no tools necessary. A wallmount back plate (option) is availble, too.

It is not allowed to install the HSEUiREG in other mounting direction then as shown in the drawings.

Back Plate Option / DIN-Rail Standard

(The HSEUiREG is always delivered for DIN-rail mount, the back-plate is an optional part that shall be mounted from the
customer. The threads from the DIN-rail mounting brackets shall be used. All screws are included into the Back-Plate Kit.)

«
...
11
12
13
14
15
»

Summary of Contents for HSEUiREG07201 Series
















Reviews:

No comments

Related manuals for HSEUiREG07201 Series

Brand: TDK-Lambda Pages: 29

Brand: Wacker Neuson Pages: 54

Brand: PELA Pages: 8

Brand: Palmgren Pages: 20

Brand: Park Tool Pages: 2

Brand: Makita Pages: 17

Brand: Mean Well Pages: 5

Brand: QUINN Pages: 4

Brand: Xtreme Pages: 10

Brand: TDK-Lambda Pages: 10

Brand: WAGO Pages: 2

Brand: V-TAC Pages: 13

Allen-Bradley ControlLogix 1756-L Series

Brand: Rockwell Automation Pages: 307

Brand: Devine Pages: 5

Autronic ACR Series

Brand: Forte Pages: 2

Brand: Sherex Pages: 16

Brand: Urrea Pages: 12

Brand: Grizzly Pages: 60

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands