CAMSPORTS EVO PRO 1080 - User Manual - English
4
Troubleshooting:
My CAMSPORTS does not start:
The battery power may be running low: recharge the battery
the camera may be locked: reset and try again
My CAMSPORTS switches off automatically:
The battery power is running low recharge the battery
The memory is full: delete files to free up space on your camera
When my CAMSPORTS is connected to my computer, I cannot find the new drive folder:
There may be a problem with the USB cable: check or replace the USB cable
There may be a problem with the USB port: try another USB port or restart the computer
The sound from my CAMSPORTS is too noisy:
The conditions you are recording in are too noisy: use the rear cover without the mic hole.
My CAMSPORTS did not save my last data:
The TF/SD card may be full: delete files to free up space on your camera
The reset button has been accidentally pressed while recording
My CAMSPORTS video is not well centered or is rotated 90°:
Make sure the LED and button are facing upwards when recording
There is water or fog in my CAMSPORTS:
The rubber seals on the rear cover are missing or have moved during tightening: do not
operate your camera if there is water inside; open the rear cover and leave your
CAMSPORTS camera to dry for 24-48 hours
My computer cannot play my CAMSPORTS video files:
Make sure your computer has the latest codec releases for the MJPEG format
The recording does not show the correct date/time of shooting:
Change the time/date on your CAMSPORTS camera as explained above
Further Help:
If you have any other enquiries or suggestions about your CAMSPORTS, you can contact your local
dealer or send an email to our Technical Support department at
Please note that for any Return Material Authorisation or replacement you should contact your local
dealer or visit the web site at
www.camsports.com
for warranty policy.
Customer service:
Technical support:
Web site:
http://www.camsports.com
This device complies with Part 15 of the FCC Rules: It can be operated without causing harmful
interference and it can accept any interference received, including interference that may cause
undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
INFORMATION FOR USERS according to European Directives 2002/95/EC and 2003/108/EC on the
restriction of the use of hazardous substances in electrical and electronic equipment and waste
disposal.
The symbol of the crossed-out wheeled bin printed on the packaging indicates that this product must
be collected separately from other waste at the end of its working life.
The user must hand the product over to a designated collection site for waste electrical and electronic
equipment or return it to the retailer on a one-for-one basis when buying a new similar product.
By correctly separating this product for recycling, processing or environmentally friendly disposal, you
will be helping to prevent possible negative impacts on the environment and human health, and
contributing to the recycling of its component materials.
Users who dispose of this product illegally may be liable to prosecution under applicable laws.
