7
8. Tighten assembly to 50 N•m [37 lb•ft] of torque. See
Fig. 9
Fig. 9
9. Secure undercarriage to rear hub using the
provided 3/8-24 lug nuts (
D
). Use bolt circle
Ø156
mm
.
See Fig. 10
CAUTION: If needed, take rubber protector off
of hub.
CAUTION: Follow torque specification indicated by
vehicle manufacturer when tightening wheel nuts.
Fig. 10
10.Attach stabilizing rod (
2
) to anchor bracket (
1
), using
the long spacer bushing (
B8
), the short spacer
bushing (
3
), flat washer (
4
) and nut (
5
). Torque to 70
N•m [52 lb•ft]. See Fig. 11
CAUTION: Components must be assembled in the
order shown.
Fig. 11
11.Verify that spring assembly bolt (
6
) is tightened to
the recommended torque specification: 75 N•m [55
lb•ft]. Refer to Fig. 12
Fig. 12
12.Inspect the rear track systems and ensure that all
mounting bolts were correctly tightened during
installation.
50 Nm
D
