18
EU
EU
POLISH
MARK
POLISH
MARK
CDS-6IPECO User’s manual
IV Trouble solving
V Appendix A
a) PROBLEMS WITH CONNECTING.
If, despite correct configuration there is a problem with the connection between
devices, eg. the device can not see each other, reset modules and setup from the
beginning.
a) SETTING THE IP ADDRESS OF COMPUTER.
To change the IP address of the computer, go to
Control Panel
->
Network and
Internet
->
Network Connections
. Then select the current network adapter, which
is connected to the module CDS-6IPeco. Click on
Internet Protocol Version 4 (TCP
/ IPv4)
on the list, and then click
Properties
.
In an open window, you can enter a new IP address of the computer, or by clicking
on the
Advanced
... button ->
Add
..., you can enter another computer's IP
address, not to change the current settings.
MODULE RESET TO DEFAULT.
b)
In order to reset the settings to the default parameters, press and hold for at
least 5s RESET button next to the LAN connector.
