Camsat CDS-5IPmini, User Manual

Page: 15 / 23

The Site Survey button will become active. Click it for the scanning to begin automati-
cally. After a while, the list of the frequencies used in the area will be displayed, togeth-
er with the strengths of their signals. The signals below -85 are considered as noises.-
Such frequencies and channels which are not on the list may be used for the wireless
Video transmission.
To scan the channels, temporarily switch the unit into the WIRELESS CLIENT mode.
To do so, go to the Wireless menu and select the Basic Settings tab. In the Operation
Mode menu, select the WIRELESS CLIENT parameter. Click the Apply button to apply.
8. Radio transmission security.
14
EU EU
POLISH
MARK
POLISH
MARK
CDS-5IP
MINI
User Guide
The CDS-5IPmini devices have the option of securing video transmission with an
encryption key or such algorithms as WPA-PSK and WPA-PSK2.
To secure the transmission, select the Security Settings tab in the Wireless menu. In
the drop-down menu, click Authentication and select the protection method:
If the WPA data encryption method is selected, a network key is required, the same for
all the CDS-5IPmini units. The user can select the encryption key type in the Data
Encryption menu:
64-bit WEP:
consists of no more than 10 hexadecimal characters.
128-bit WEP:
consists of no more than 26 hexadecimal characters.
152-bit WEP:
consists of no more than 32 hexadecimal characters.
1.
2.
3.
Open System: This option enables connecting to any device unit without any
protection measures.
WPA-PSK: This is the simplified WPA mode, which does not need any special
server for authentication. Instead, it uses the WPA network key, pre-determined
for every radio link node. This is an efficient solution for big- and medium-sized
stationary structures.
WPA2-PSK:
Because this is the new WPA version, only clients with the WPA2 are
available. If this option is selected, the data encryption will proceed according to
the AES algorithm and a password will be required for communication.