5. Safety warnings
5.1.
General warranty terms
The device is supplied with a standard warranty card. The manufacturer declines all other
warranties. In no case the producer is liable for any damages (including, without limita-
tion, consequential, special, or incidental damages, or damage for loss of profits, business
interruption, loss of business information or other pecuniary loss) arising out of the use or
inability to use this product, even if the manufacturer has been advised of the possibility of
such damages.
Camsat grants a 24 month warranty for the CAM-Analog2.0 transmission kit
1. If the device is not be operating properly, make sure, before returning the device for ser-
vicing, that everything was done according to the operating manual.
2. If the faulty device is returned or send in for repairs, a thorough written description of
the signs of the device’s faulty operation, including the operating environment and the
manner in which they appear, should be enclosed.
3. The prerequisite for exercising the warranty rights is enclosing the proof of purchase, in-
cluding the purchase date and description of damage, with faulty device.
4. Warranty repairs cover only faults occurring due to reasons inherent to the sold device.
5. Warranty repairs will be carried out in the shortest possible amount of time not exceed-
ing 14 days, counting from the moment of accepting the device for servicing. If parts need
to be imported, the repair deadline may be extended by the repair time.
6. The warrantor is not responsible for the loss of the device configuration settings result-
ing from device repair or malfunction.
7. The warrantor may refuse to carry out warranty repairs or terminate the warranty if it is
determined that the seals placed on devices or components comprising it are damaged.
8. All repair services resulting from warranty are made exclusively in the Camsat service.
Warranty does not cover
1. Mechanical damage of devices and failures occurring due to fortuitous events, such as:
fire, power grid overvoltage, electrical discharges, power supply, effects of chemical sub-
stances.
2. Damage occurring due to: improper handling of the device, using the device against its
intended use or the operating manual, customer’s negligence, improper use (temperature,
humidity, flooding, dust, sanding up, improper supply voltage).
3. Claims on account of the technical parameters, if they are consistent with those indi-
cated by the manufacturer.
CAM-Analog2.0 Instrukcja
10