IP Telephone User Guide
18
This shows the IP address assigned to the phone which can be entered
into the browser.
The exact address may vary but should have a similar format to the one
shown.
If you have problems with either steps 1a or 1b, or when
picking up an attached telephone handset you hear a
diagnostic message, please see Troubleshooting on page 62.
Step 1b. Accessing the web pages using VoiceConnect
Assuming VoiceConnect application from the supplied CD is installed and
running, once the Flexor 500 and PC are on the same network and
powered-up, the following dialog box will be displayed after a short time
(up to 30 seconds):
Click on Configure Now.
Step 2. Configuration pages
Having followed step 1a or step 1b you should now see a web page
displaying the Flexor 500 management web pages:
Note
