10
Make sure that valve cap and emergency drain hose are reinstalled properly, cap
plates should be inserted aligning to hole plates otherwise water may leak.
Some machines dont have emergency drain hose, so step 2 and step 3 can be skipped.
Rotate lower cover cap directly to make water run into basin.
When
the
appliance
is
in
use
and
depending
on
the
programme
selected
there
can
be
hot
water in
the pump
.
Never
remove
the
pump
cover
during
a
wash
cycle
,
always
wait
until
the appliance
has
finished the
cycle
,
and
is
empty
.
When
replacing
the
cover
,
ensure
it
is
securely
re-tightened
.
Cleaning The Drain Pump Filter
Be careful of the hot water!
Allow detergent solution to cool down.
Unplug the machine to avoid electrical shock before washing.
Drain pump filter can filter the yarns and small foreign matters from the
washing.
Clean the filter periodically to ensure the normal operation of washing
machine.
Open the lower cover cap
Rotate 90°C and pull out
the emergency drain hose,
and take off the hose cap
Open the filter by turning
to the counter clockwise
Remove extraneous matter
1
2
3
Close the lower cover cap
6
5
4
Emergency
drain hose
After water runs out,reset
the drain hose
Warning!
！
Caution!
MAINTENANCES
2
4
