Campomatic FR-450 User Manual Download Page 4

 

Important Safety Instructions 

 

These warnings are provided in the interest of your safety. Ensure that you understand them 
all before installing or using this appliance. Your safety is of paramount importance. If you 
are still unsure about the meaning of these warnings, contact the supplier for assistance. 

Intended use 

The refrigerator is designed for domestic use only, in detail for storage of edible foods at low 
temperature. If the refrigerator is used for other purposes such as commercial applications or 
used incorrectly, the manufacturer accepts no liability for any damage that may occur. 
Alterations or changes to the refrigerator are not permitted for reasons of safety. 

Prior to initial start-up

 

Check the appliance for transport damage. Under no circumstances should a damaged 
appliance be plugged in. In the event of serious damage, contact your supplier. 

Refrigerant 

Refrigerant gas is contained within the refrigerant circuit of the appliance. Ensure that none of 
the components of the refrigerant circuit becomes damaged during transportation and 
installation. 
If the refrigerant circuit should be damaged: 

 

Avoid opening near flames and sources of ignition. 

 

Thoroughly ventilate the room in which the appliance is situated. 

Other warnings include: 

 

WARNING 

  Keep ventilation openings, in the appliance enclosure or in the built-in   

structure, clear of obstruction. 

 

WARNING 

  Do not use mechanical devices or other means to accelerate the 

defrosting process, other than those recommended by the manufacturer. 

 

WARNING 

  Do not damage the refrigerant circuit. 

 

WARNING 

  Do not use electrical appliances inside the food storage compartments of 

the recommended by the manufacturer. 

 

WARNING 

  The  appliance is not intended for use by young children without 

supervision. 

 

WARNING 

  Young children should be supervised to ensure that they do not play with   

the appliance. 

 

WARNING 

  When disposing of the appliance do so only at an authorized  waste 

disposal centre. Do not expose to flame. 

 

WARNING 

  If the supply cord is damaged, it must be replaced by the manufacturer or 

their service agent or a similarly qualified person in order to avoid a hazard. 

 
 
 
 

      

 

 

 

  

   

   

    

  

 

  

    

 

  

Summary of Contents for FR-450















Reviews: