17
Instructions for the installer
The following operation requires building and/or carpentry work so must be carried out by a competent
tradesman.
Installation can be carried out on various materials such as masonry, metal, solid wood or
plastic laminated wood as long as they are heat resistant (T 90°C).
Create an opening with the dimensions shown in the paragraph 10.1 in the top surface of the counter,
keeping a minimum distance of 50 mm from the rear edge.
This appliance can be mounted against walls higher than the work surface on condition that a certain
distance be kept between the appliance and the wall as shown in the figure so as to avoid damage from
overheating.
Make sure there is a minimum of
750 mm
between the hob and any shelf that may be installed directly
above them.
10.5 Mounting
This appliance must not be built-in above a dishwasher.
Installation of an oven without cooling fan underneath the hob is forbidden.
Pass the power supply cable through the back of the unit, taking care that it does not touch the bottom
casing of the hob or the oven (if any) installed underneath it.
IMPORTANT: when installing the appliance above
a cupboard, a dividing shelf, as shown above, must
be installed.
If installed above an under-bench oven, this is not
required.
Installation of an oven without cooking fan
underneath the hob is forbidden.
