4
.
Install gas supply line and regulator to the portable tankless water heater
.
DO NOT OVER TIGHTEN
.
OVER TIGHTING MAY CRACK THE GAS REGULATOR
CAUSING A GAS LEAK
!
Check for any gas smell before ignition
!
Make sure it is screwed
all the way on
.
5
.
Attach the shower head to the fitting marked
‘
Water Outlet
.
Do not over tighten
.
6
.
Install two
“ ”
D cell batteries in the compartment on the bottom left of the heater
.
Check
that batteries are facing the correct direction
.
7
.
Use the top tab on the portable tankless water heater to suspend from a mounted screw
capable of holding 30 pounds
.
Place at a comfortable height without putting stress on the
gas hose
.
8
.
Attach gas regulator with hose to the LP cylinder
.
Use hand pressure only on the plastic
connector
.
LEAVE GAS CYLINDER VALVE IN THE
“
OFF
”
P OSITION
.
In The Box
Description
Identification
Quantity
Remarks
Portable tankless
water heater
1 piece
On
/
off switch shower
head with 5 feet
chrome hose
1 set
CSA Gas regulator
with 5 feet hose
1 set
Test for leaks after
fitting
Gas connector
（
Fixed to inlet fitting
already
）
1 piece
1
/
2
”
BSP female X
5
/
8
”
NPT male flare
