Content
ENGLISH
ENGLISH
02
03
Safety instructions
• Please read this manual carefully before using this product and follow carefully the
installation, mounting and alignment instructions.
• Any electrical or magnetic field near the flat antenna may cause poor reception or
even cause the unit to completely lose the signal.
• Do not damage the plastic housing of the antenna. The housing protects the anten-
na from moisture and weather.
• Make sure that the antenna does not fall to the ground or be subjected to any other
impact, as otherwise the electronics inside may be damaged.
• Do not open the housing of the antenna, as this will invalidate the warranty. Leave
repairs only to qualified personnel.
• Obstacles such as buildings, trees, etc. can affect the signal of the satellite and lead
to the loss of the signal.
• The antenna cover should always be free of dirt or other substances as this will
block the reception of the signal from the satellite.
• The cable between the antenna and the satellite receiver must not be longer than
30 m, as this will reduce the quality of the signal.
• Using uninsulated jacks will result in loss of signal level.
• Tighten all mounting screws when making adjustments to align the antenna.
• This product contains a universal LNB, it is prohibited to add, replace or modify an
LNB.
Safety instructions ...........................................................................03
1. Scope of delivery and designations
.......................................04 - 05
2. Selecting a location
......................................................................06
3. Mounting options
..........................................................................08
3.1 Basic mounting of the antenna ..........................................09
3.2 Mounting on a mast ...............................................................10
3.3 Mounting on a wall .................................................................11
3.4 Mounting on a window .........................................................12
4. Prepare and lay coaxial cable
..................................................13
5. Align the antenna
..........................................................................14
6. Skew setting
....................................................................................15
7. Troubleshooting
.............................................................................16
8. Specifications
..................................................................................17
