1. Attach POL/QCC (A) to tank valve. Make sure you
have a good seal.
2. Close shut off valve (B) by turning clockwise.
3. Open tank valve (C); check for leaks.
1. Shut the gas off at the tank (C) then let the fire go out.
2. Turn the shut off valve (B) to the off position.
3. Let the campfire cool before touching or wrapping the hose around the pedestal and replacing the canister
on top.
TURNING THE CAMPFIRE OFF
LIGHTING THE CAMPFIRE
Campfire Must Be Lit Manually
A
B
C
Before turning gas on, apply a solution of soapy water
to all hose connections. If bubbles appear when gas is
turned on, shut off gas supply and tighten connections
where bubbles appear. Repeat as necessary.
Place lighter flame on burner and slowly open the campfire shut off valve (B), it will take a few seconds for
the line to purge the air. Once the purging is complete the burner will light, then adjust the shut off valve (B)
for desired fire height.
Wait 5 min. before relighting, if campfire does not light.
R
Operating Instructions
Read Before Lighting
Email: [email protected]
9
Toll Free 1.888.768.7737
