R
•
The installation must conform with local codes or, in the absence of local codes, with the National
Fuel Gas Code, ANSI Z223.1
•
For use with liquid propane only. The maximum inlet gas supply pressure is 11” water column
Input is 28.5MBH. Maximum 64,000 BTU/hr.
1. Clothing or other flammable materials should not be hung from the appliance, or placed on or
near the appliance.
2. Any guard or other protective device removed for servicing the appliance must be replaced prior
to operating the appliance.
3. Installation and repair should be done by a qualified service person. The appliance should be
inspected before use and at least annually by a qualified service person. More frequent cleaning
may be required as necessary. It is imperative that control compartment, burners and circulating
air passageways of the appliance must be kept clean.
4. Ensure ALL components are free of damage before use. Use replacement parts only supplied by
the manufacturer.
5. Do not use this appliance if any part has been underwater. Immediately call a qualified service
technician to inspect the appliance and to replace any part of the control system and any gas
control, which has been underwater.
6. For use with a 20lb. Propane Cylinder.
7. The LP-gas supply cylinder to be used must be constructed and marked in accordance with the
specifications for LP-gas cylinders Standard, CAN/CSA B339, and LP-gas cylinders of the U.S.
Department of Transportation (DOT).
8. The cylinder used must include a collar to protect the cylinder valve.
The Campfire In A Can should have the canister top placed over it when
it is not in use to protect it from water damage.
1
:
IMPORTANT
Do not store propane tank indoors.
Email: [email protected]
4
Toll Free 1.888.768.7737
Warnings
