Campbell Wind Monitor Series, Product Manual

Page: 10 / 30

Table 6-3: Physical specifications
05103
Wind
Monitor
05103-45
Wind
Monitor-
Alpine
05106 Wind
Monitor-MA
05108 Heavy
Duty Wind
Monitor
05108-45
Heavy Duty
Wind
Monitor-
Alpine
05305 Wind
Monitor-AQ
Operating
temperature
range
–50 to +50 °C, assuming
non-riming conditions
–50 to +60 °C, assuming
non-riming conditions
-50 to +50 °C,
assuming
non-riming
conditions
Overall
height
37 cm (14.6 in)
40 cm
(15.7 in)
38 cm
(15 in)
Overall
length
55 cm (21.7 in)
57 cm
(22.4 in)
65 cm
(25.6 in)
Propeller
diameter
18 cm
(7.1 in)
14 cm
(5.5 in)
18 cm (7.1 in)
20 cm
(7.9 in)
Mounting
pipe
description
34 mm (1.34 in) outer diameter; standard 1.0 in IPS schedule 40
Weight
1.5 kg
(3.2 lb)
1 kg
(2.2 lb)
1.5 kg
(3.2 lb)
1 kg (2.2 lb)
1.1 kg
(2.5 lb)
7. Installation
If you are programming your data logger by using Short Cut , skip Wiring (p. 8) and Programming
(p. 9). Short Cut does this work for you. See QuickStart (p. 2) for a Short Cut tutorial.
7.1 Wiring
Connections to Campbell Scientific data loggers are given in Table 7-1 (p. 9). When Short Cut
software is used to create the data logger program, the sensor is wired to the terminals shown in
the wiring diagram created by
Short Cut .
Wind Monitor Series 8