Campbell TX312, Instruction Manual

Page: 89 / 96

Appendix G. Extended ASCII Command Set
G-17
G.6.1 Read Version Information
Syntax:
VER
Access level: USER
TX312 State: Enabled/Disabled
This command returns the transmitter serial number, hardware version number,
firmware version number and GPS module version numbers.
G.6.2 Read Transmission Status
Syntax:
RST
Access level: USER
TX312 State: Enabled/Disabled
This command returns the transmitter state, GPS state, time to next
transmission, number of bytes in timed transmit buffer, number of bytes in
random transmit buffer, number of times random data has been transmitted,
failsafe status and supply voltage.
The transmitter responds with:
Transmitter: Enabled/Disabled[CR][LF]
GPS: On/Off[CR][LF]
RTC: Valid/Invalid[CR][LF]
Time To Next Tx: dd:hh:mm:ss[CR][LF]
Timed Message Length: nnnn[CR][LF]
Next Timed Tx: N/A or mm/dd/yyyy hh:mm:ss
Random Message Length: nnnn[CR][LF]
Random Message Tx Count: nnn[CR][LF]
Next Random Tx: N/A or mm/dd/yyyy hh:mm:ss
Fail-Safe: OK/Tripped[CR][LF]
Supply Voltage: xx.x V
G.6.3 Read Last Transmission Status
Syntax:
LTXS
Access level: USER
TX312 State: Enabled/Disabled
This command returns the status of the last transmission. The last transmission
could have been a regularly scheduled timed transmission, a random
transmission, or a test transmission triggered by a test command.