Campbell TempVue 10, Product Manual

Page: 2 / 31

Table of contents
1. Introduction 1
2. Precautions 1
3. Initial inspection 2
4. QuickStart 4
5. Overview 7
6. Specifications 8
7. Installation 9
7.1 Wiring 9
7.1.1 4-wire configuration 9
7.1.2 2-wire configuration 10
7.2 Programming 11
7.2.1 CRBasic programming 11
7.2.1.1 BrHalf4W() 12
7.2.1.2 BrHalf() 12
7.2.1.3 PRTCalc() 13
7.3 Siting 13
7.4 Installation in a radiation shield 15
7.5 Mount the shield 16
8. Operations 17
8.1 Sensor schematic 17
8.2 Reducing measurement noise 18
9. Maintenance, troubleshooting, and calibration 18
9.1 Maintenance 18
9.2 Troubleshooting 19
9.3 Calibration 19
10. References 20
Appendix A. Importing Short Cut code into CRBasic Editor 21
Appendix B. Example programs 22
Table of Contents - i