FIGURE 9-1. Multiple GRANITE Measurement Modules connected in a daisy-chain topology
For best performance, a CPI terminator (supplied in a CPI Network Kit) is installed in the open CPI
port at the end of a daisy-chain network. For more information
https://s.campbellsci.com/documents/us/technical-papers/cpi-bus.pdf
9.6.2 Star topology
A star topology uses a passive RJ45 hub, such as the HUB-CPI, to connect multiple GRANITE
Measurement Modules. An illustration of this is shown in
NOTE:
Do not use a CPI terminator with this configuration.
FIGURE 9-2. Multiple GRANITE Measurement Modules connected in a star topology
TEMP 120
18