1. Open
Short Cut
and click Create New Program.
2. Double-click the data logger model.
NOTE:
A reference temperature measurement is required for accurate readings. This example uses
the 109 temperature probe.
3. In the Available Sensors and Devices box, type 109 or find the 109 in the Sensors >
Temperature folder. Double-click 109 Temperature Probe. Under the Properties tab, use
the default of Deg C.
4. Click the Wiring tab to see how the temperature probe is to be wired to the data logger.
Wire the probe accordingly, then click OK.
SnowVUE 10 Sonic Ranging Sensor
2
