Campbell RF451, Product Manual

Page: 6 / 48

8. Gateway radio 16
9. Endpoint 17
10. Repeater 18
11. LoggerNet setup 19
12. PakBus Graph 20
13. Transceiver location 21
14. Power considerations 21
15. RF451/RF452 antennas 22
16. Electrostatic issues 23
17. Troubleshooting 23
17.1 LED status 23
17.2 Troubleshooting scenarios 25
Appendix A. FCC notifications 26
Appendix B. Installation examples 27
B.1 RF451/RF452 radio communications with one or more data loggers 27
B.1.1 Configuring the RF451/RF452 radio connected to the computer 28
B.1.2 Configuring endpoint RF451/RF452 data loggers 29
B.1.3 Setting up communications between the RF451/RF452 data logger and the
computer
29
B.2 RF451/RF452 communications with multiple data loggers using one repeater 30
B.2.1 Configuring the RF451/RF452 radio connected to the computer 32
B.2.2 Configuring the data logger acting as a repeater 33
B.2.3 Adding the endpoint/repeater data logger to the LoggerNet network 34
B.2.4 Adding endpoint data loggers to the network 34
B.2.5 Using additional communications methods 34
B.3 Computer-to-RF network with parallel repeaters (using SubNet ID) 35
B.4 Data logger call-back 38
Appendix C. Settings Editor 40
Table of Contents - ii