RAWS-H Remote Automated Weather Station
4.3 Solar Radiation
The solar radiation sensor is connected to the RAWS connector panel “SOLAR
RAD SDI-12” connector COLOR CODED GREEN. The pyranometer sensor
is internally wired from the RAWS connector panel to the CR1000 datalogger.
Connector Panel “SOLAR RAD SDI-12” connector COLOR CODED GREEN
Connector Pin A Solar
to CR1000 3H
Connector Pin B Solar Sensor -
to CR1000 3L/AG (3L shorted to AG)
Connector Pin C Solar Sensor Gnd
to CR1000 AG
Connector Pin D SDI-12 Ground
to CR1000 Ground*
Connector Pin E SDI-12 Signal
to CR1000 C5* (*Note: 2
nd
SDI-12
sensor)
Connector Pin F SDI-12 12V
to CR1000 12V*
4.4 Wind Speed and Direction
The windset sensor is connected to the RAWS connector panel “WS/WD”
connector COLOR CODED RED. The wind speed probe is internally wired
from the RAWS connector panel to the CR1000 datalogger.
Connector Panel “WS/WD” connector COLOR CODED RED
Connector Pin A Sensor ground
to CR1000 AG
Connector Pin B Wind dir. Excitation to CR1000 Ex2
Connector Pin C Wind dir. Signal
to CR1000 2H
Connector Pin D Power ground
to CR1000 Ground
Connector Pin E +12V power
to CR1000 +12V
Connector Pin F Wind speed signal
to CR1000 P1
4.4.1 SDI-12 Sensor
An SDI-12 Sensor can be connected to the RAWS connector panel “SDI-12”
connector COLOR CODED YELLOW. The wind sensor is internally wired
from the RAWS connector panel to the CR1000 datalogger.
Connector Panel “SDI-12” connector COLOR CODED YELLOW
Connector Pin A
to CR1000 C7
Connector Pin B 12V
to CR1000 12V
Connector Pin C Power ground
to CR1000 Ground
Connector Pin D Open
to CR1000
4.5 Fuel Moisture and Fuel Temperature
The Campbell Scientific CS506 and CS205 sensors are combined into one
connector (part#CS516-LQ). This sensor is internally wired from the RAWS
connector panel to the CR1000 datalogger. This sensor is connected to the
RAWS connector panel “FM/FT” connector COLOR CODED BROWN.
Connector Panel “FM/FT” connector COLOR CODED BROWN
Connector Pin A CS205 Temp. Signal
to CR1000 4L
Connector Pin B Sensor Ground
to CR1000 Ground
Connector Pin C CS205 Temp. Excitation to CR1000 EX1
Connector Pin D CS506 FM Enable
to CR1000 C8
Connector Pin E CS506 FM Signal
to CR1000 4H
Connector Pin F CS506 FM +12V power to CR1000 +12V
5
