Raven110 GPRS AirLink Cellular Modem
19
Any boxes that do not have a green check indicate a problem with the modem
connecting with the cellular network. Signal strength (RSSI) should be -60 to
-85. The IP address will change for Dynamic IP accounts.
Modem settings have to be changed, and the APN number entered, using
Wireless Ace 3G (Section 5.3). After the Raven GPRS template file has been
loaded, you can verify settings in the Misc, Serial, and GPRS groups have been
configured as shown below:
The Device Port gets changed from the default 12345 to 3001 when the
template file is loaded into the modem (Section 5.3). The Device Port number
gets entered with the IP address in LoggerNet (Section 6).
