Campbell RainVUE SDI-12 Series, Product Manual

Page: 10 / 52

C.1.1 Acknowledge active command (a!) 30
C.1.2 Send identification command (al!) 30
C.1.3 Start verification command (aV!) 31
C.1.4 Address query command (?!) 31
C.1.5 Change address command (aAb!) 31
C.1.6 Start measurement commands (aM!) 32
C.1.7 Start concurrent measurement commands (aC!) 32
C.1.8 Start measurement commands with cyclic redundancy check (aMC! and aCC!) 34
C.1.9 Stopping a measurement command 34
C.1.10 Send data command (aD0! … aD9!) 34
C.1.11 Continuous measurement command (aR0! … aR9!) 35
C.1.12 Extended commands 35
C.2 SDI-12 transparent mode 35
C.2.1 Changing an SDI-12 address 36
C.2.2 Changing an SDI-12 address — CR200(X) Series 38
C.3 References 39
Table of Contents - ii