PS150/CH150 12 V Charging Regulators
12
24 VDC Power Supply with Interchangeable Blades
Input Voltage:
100 – 240 VAC
Input Frequency:
47 – 63 Hz
Output Voltage:
24 VDC
Output Current (max):
1.67 A
Protection:
Unit will auto-recover upon removal of fault.
UL Approval:
UL60950-1 2
nd
Edition
Unit has interchangeable blades. Unit ships with US/Canada plug installed.
For international orders, order an International Plug Set for international
blades. International blade selection contains blades for Australia/New
Zealand, UK, Europe/South America, Korea, Argentina, China, & India/South
Africa.
AC/DC DIN Rail Mount Power Adapter (24 V 3.8 A NEC Class 2 Power
Supply Kit)
Input Voltage:
85 – 240 VAC or 90 – 350 VDC
Input Frequency:
45 – 65 Hz
Output Voltage:
24 VDC
Output Current:
3.8 A (–25 to 60 °C)
Protection:
3.15 A internal slow-blow fuse
Approval:
ETL Listed for US and Canada
Both of the recommended chargers have DC voltage output which
can be used on either the
CHARGE/CHARGE
or
SOLAR/G
terminal blocks. Maximum input charging current on the
CHARGE/CHARGE
terminal blocks is limited to 1.1 A.
Maximum input charging current on the
SOLAR/G
terminal
blocks is limited to 3.6 A.
CHARGE/CHARGE
terminal blocks have no polarity. Power wires from the
charging source can be connected in any fashion. The PS150/CH150 will only
float charge a battery with power connected to the
CHARGE/CHARGE
terminal blocks which is fine when using an AC/DC charging source.
SOLAR/G
terminal blocks do have a polarity that must be followed when
wiring up either of the AC/DC devices. Positive wire goes to the terminal block
marked
SOLAR
. Negative wire goes to the terminal block marked
G
. Higher
power throughput makes this an attractive option. It will float charge a battery,
but it will also try to quick charge as well depending on the needs of the
battery.
NOTE
