Campbell PONDVIEW 4.0, Instruction Manual

Page: 25 / 38

Section 3. Control Set Points and Alarms
3-3
3.2.2 Dissolved Oxygen Alarm
To select the slider bars for DO alarm set points, double click on the CLICK
FOR ALARMS SET POINT box found in the lower right corner. Like the
other slider bars, move the bar until the desired set point is found. This enables
the alarms for the dissolved oxygen in the ponds. If the DO is lower than the
set point, the alarms are activated. These alarms are acknowledged by using
the mouse to select the alarm and pressing the right mouse key.
3.2.3 Communication Alarm
If communication between the CR10X-TD and PC is disrupted, the
Communication Status light will turn red and alarm sounds are activated.
Disable this alarm by selecting the acknowledge button.