NL120 Ethernet Module
Cable Requirements:
Use a straight-through Ethernet cable when the
cable is run from the hub to the NL120. Use a
crossover Ethernet cable when the cable is run
directly from the computer to the NL120. Use
a shielded Ethernet cable and/or the 28033
surge suppressor when the cable length is
greater than 9 ft.
The maximum recommended segment length for 10BaseT
networks using CAT5 cable is 100 meters. Segment length is the
length of cable between the NL device and the Ethernet repeater,
hub, switch, or router it is connected to.
Ethernet Speed:
10Base-T (10 Mbps), half-duplex
Software Requirements:
LoggerNet 3.2 or later
PC400 1.3 or later
Dimensions:
10.2 x 6.4 x 2.8 cm (4.0 x 2.5 x 1.1 in)
Weight:
66.6 g (2.35 oz)
FIGURE 5-1. NL120 Ethernet Module
6. TCP/IP Functionality
This section describes the main TCP/IP functionality of a datalogger with an
NL120 attached. Additional functionality may be added in the future. For
NOTE
5
Summary of Contents for NL120
