EC155 CO
2
and H
2
O Closed-Path Gas Analyzer
10
FIGURE 5-2. Dimensions of the older-design EC155 analyzer; sample
cells with serial numbers less than 2000
5.4 Power Requirements
Voltage supply:
10 to 16 Vdc
Power at 25 °C including CSAT3A:
4.8 W
Power at 25 °C excluding CSAT3A:
4.0 W
Power at 25 °C in power-down
mode (CSAT3A fully powered
and EC155 in stand-by):
3.0 W
Power for heated intake:
set by user, 0 to 0.8 W
View compliance documentation at
6. Installation
The EC155 is supplied with mounting hardware to attach it to the end of a
horizontal pipe of 3.3 cm (1.3 in) outer diameter, such as the CM202, CM204,
or CM206 crossarm. The EC155 mounting hardware also accommodates an
optional CSAT3A sonic anemometer, which places it at the proper position
relative to the intake. The following steps describe the normal mounting
procedure for the sample-cell assembly and optional CSAT3A sonic head.
Summary of Contents for EC155
