Campbell CS705, Instruction Manual

Page: 18 / 32

CS705 Snowfall Adapter
10
Attach the mounting bracket/tipping bucket assembly to the mounting pipe or
mast:
1. Install and level the mounting pipe or mast.
2. Loosen the mounting bracket’s wingnuts and slide the assembly over the
pipe. If necessary, the pole mounting hardware can be removed to get the
bolts around the pipe. If this is necessary, to reassemble, put the mast
clamp on first followed by the flat washer, lock washer, and wingnut. See
FIGURE 6-7 .
3. Tighten the assembly onto the pipe, while ensuring that nothing is
blocking the top of the rain gage.
4. Adjust the two bolts on the leveling springs until the bubble in the level is
inside the bullseye.
FIGURE 6-7. CM270 pipe mounting (exploded view)
Mast clamp
Lock washer
Bubble level
Flat washer
Wingnut