background image

WARRANTY AND ASSISTANCE

The

 

CS505 FUEL MOISTURE SENSOR is warranted by CAMPBELL SCIENTIFIC, INC. to be free from

defects in materials and workmanship under normal use and service for twelve (12) months from date of
shipment unless specified otherwise.  Batteries have no warranty.  CAMPBELL SCIENTIFIC, INC.'s
obligation under this warranty is limited to repairing or replacing (at CAMPBELL SCIENTIFIC, INC.'s
option) defective products.  The customer shall assume all costs of removing, reinstalling, and shipping
defective products to CAMPBELL SCIENTIFIC, INC.  CAMPBELL SCIENTIFIC, INC. will return such
products by surface carrier prepaid.  This warranty shall not apply to any CAMPBELL SCIENTIFIC, INC.
products which have been subjected to modification, misuse, neglect, accidents of nature, or shipping
damage.  This warranty is in lieu of all other warranties, expressed or implied, including warranties of
merchantability or fitness for a particular purpose.  CAMPBELL SCIENTIFIC, INC. is not liable for special,
indirect, incidental, or consequential damages.

Products may not be returned without prior authorization.  To obtain a Returned Materials Authorization
(RMA), contact CAMPBELL SCIENTIFIC, INC., phone (435) 753-2342.  After an applications engineer
determines the nature of the problem, an RMA number will be issued.  Please write this number clearly on
the outside of the shipping container.  CAMPBELL SCIENTIFIC's shipping address is:

CAMPBELL SCIENTIFIC, INC.
RMA#_____
815 West 1800 North
Logan, Utah 84321-1784

CAMPBELL SCIENTIFIC, INC. does not accept collect calls.

Non-warranty products returned for repair should be accompanied by a purchase order to cover the repair.

815 W.  1800 N.
Logan, UT 84321-1784
USA
Phone  (435) 753-2342
FAX  (435) 750-9540
www.campbellsci.com

Campbell Scientific Canada Corp.
11564 -149th Street
Edmonton, Alberta T5M 1W7
CANADA
Phone  (403) 454-2505
FAX  (403) 454-2655

Campbell Scientific Ltd.
Campbell Park
80 Hathern Road
Shepshed, Leics. LE12 9RP
ENGLAND
Phone  (44)-50960-1141
FAX  (44)-50960-1091

Summary of Contents for CS505











Reviews: