CRS451/CRS456 Submersible Water-Level Recording Sensor
8.
Once the
Data Tables
have been configured, the configuration process is
finished and the
Finish
button can be selected.
9.
Once the configuration is complete, it must be copied to the CRS451
before it will take effect. Click on
Apply Configuration to CRS45X
to
start this process.
Before sending the configuration file to the CRS45X, HydroSci may provide a
warning that your start and stop times may need adjusting. If the Start Time is
in the past, the CRS45X will immediately begin logging data but any offset
you may have applied will not be effective. Also, if the Stop Time is in the
past, no data will be logged.
Save data if you have not already done so. Archived data is purged from the
CRS45X when a new configuration file is copied so you will want to collect
any data before sending the configuration file.
This option allows you to save the configuration file for future reference or for
easy use in other similarly deployed sensors.
The CRS451 is calibrated to pressure units in psi. TABLE B-1 contains the
conversion factors used to convert psi to depth of water.
14
Summary of Contents for CRS451
