CRS451/CRS456 Submersible Water-Level Recording Sensor
7.3 Configure CRS45X for Measurements
1.
Click
Configuration
.
2.
Select
Create New Configuration
button located at lower left of screen.
3.
Select the type of measurements you want to make.
a)
Barometer Pressure Reference should be selected if you want to use
CR45X sensor as a barometer to compensate for changes in
barometric pressure.
See Section 7.4.2,
Using a Barometer
, if using the measurements
from a nearby barometer to correct for the barometric pressure.
b)
Disable: To preserve battery between deployments always configure
the sensor for storage after use.
NOTE
9
Summary of Contents for CRS451
