CM300-Series Mounting Poles
2
2. Specifications
Material:
Stainless Steel
Pipe Size:
3.81 cm (1.5 in) IPS
Outer Diameter:
4.8 cm (1.9 in)
Length
CM300:
58 cm (23 in)
CM305:
119 cm (47 in)
CM310:
142 cm (56 in)
J-Bolts:
1/2 in x 12 in SS with triple-nuts and washers
(Pedestal J-Bolt Kit option)
CM300 Series Options
:
–NP No Pedestal Base
–PJ Pedestal J-Bolt Kit
–PS Pedestal Short Legs
–PL Pedestal Long Legs
There is a series of holes in the Pedestal Leg Base that determine the leg angle
and pedestal height as shown in TABLE
3. Installation
3.1 Tools List
Not all tools listed are needed for each mounting pole option.
(2) 1/2-inch combination wrench
(2) 3/4-inch combination wrench
Large Phillips screwdriver
Torpedo level
Small sledge hammer (for Pedestal Leg option, to drive optional Ground Spikes)
Form materials (for Pedestal J-bolt Kit option, Section
Mounting Pole with Pedestal J-Bolt Kit
(p. 3)
)
Optional items (must be ordered separately):
Tripod Grounding Kit for Stainless-Steel CM110-Series Tripods
Ground Spike
3.2 CM300-Series Mounting Pole in Concrete Foundation
For permanent installations, CM300-series poles are installed in a concrete
foundation. Dig a hole 15 to 20 cm (6 to 8 in) in diameter by 60 cm (24 in)
deep (or below frost level). Place the pole in the center of the hole. Fill the hole
with concrete, and plumb the pole with a level.
NOTE
