Campbell CM300 Series, Product Manual, Page: 9 / 13

CM300-Series Mounting Poles
7
Place the pole into the base and tighten the six bolts evenly. For additional
stability, the feet are spiked to the ground using (3) ground spikes, or secured
with user-supplied anchors through the holes in the feet.
FIGURE 3-6. CM300 Mounting Pole with Pedestal Legs
3.5 Grounding
The Tripod Grounding Kit for Stainless-Steel CM110-Series Tripods may be
used to provide an earth ground for the pedestal and associated
instrumentation. Attach the earth and enclosure ground wires to the lug on the
pedestal base as shown in FIGURE 3-6 . The tripod grounding kit also includes
a lightning rod for instances where a lightning rod is needed.
CM300-series Pole
Pedestal Legs
Ground Lug