5. To edit settings at a later date, click devices and services
on the command bar and
select Manage PakBus Routers.
NOTE:
The DNS address and Port number, assigned when your account was setup, cannot be
edited.
3. Overview
The CELL200-series modules may be configured in one of five ways, depending on the data
logger, communications type, and needs of the user.
l
Integrated:
The
module
mimics
the
behavio
u
r
of
our
integrated
cell
modems.
No
settings
are
configured
directly
in
the
module.
All
settings
are
configured
in
the
attached
data
logger.
l
Non-integrated:
The
module
mimics
the
behavio
u
r
of
our
older
cellular
modems.
Settings
must
be
configured
in
both
the
module
and
the
data
logger.
l
Serial Server: In this mode, the module receives IP communications over the cellular
network and converts those to serial communications to pass on to the data logger. From
the perspective of the data logger, this is no different than a serial cable connecting it to a
computer.
NOTE:
A public static IP account must be used when the module is set up in serial server
mode. Private dynamic IP accounts do not support the serial server mode.
CELL200-Series 4G LTE Cellular Module
7
