Campbell Apogee Instruments CS310, Product Manual

Page: 14 / 25

7.3 Wiring
A schematic diagram of the CS310 is shown in FIGURE 7-1 (p. 9).
FIGURE 7-1. CS310 schematic
Connections to Campbell Scientific data loggers are given in Table 7-1 (p. 9). When Short Cut is
used to create the data logger program, the sensor should be wired to the terminals shown in the
wiring diagram created by
Short Cut .
Table 7-1: Wire colo
ur
, function, and data logger connection
Wire colo
u
r Wire function Data logger connection terminal
White Signal
U configured for single-ended analog
ue
input
1
, SE (single-ended, analog
ue
-voltage
input)
Black Signal reference ⏚ (analog
ue
ground)
Clear Shield ⏚ (analog
ue
ground)
1
U terminals are automatically configured by the measurement instruction.
7.4 Programming
Short Cut is the best source for up-to-date programming code for Campbell Scientific data
loggers. If your data acquisition requirements are simple, you can probably create and maintain a
data logger program exclusively with
Short Cut . If your data acquisition needs are more complex,
the files that Short Cut creates are a great source for programming code to start a new program
or add to an existing custom program.
NOTE:
Short Cut cannot edit programs after they are imported and edited in CRBasic Editor .
A Short Cut tutorial is available in QuickStart (p. 2). If you wish to import Short Cut code into
CRBasic Editor to create or add to a customized program, follow the procedure in Importing
CS310 Quantum Sensor 9