3. Initial inspection
l
Upon receipt of the CS310, inspect the packaging and contents for damage. File damage
claims with the shipping company.
l
The model number and cable length are printed on a label at the connection end of the
cable. Check this information against the shipping documents to ensure the correct
product and cable length are received.
4. QuickStart
A video that describes data logger programming using
Short Cut
is available at:
/videos/cr1000x-datalogger-getting-started-program-part-3
.
Short Cut
is an easy way to program your data logger to measure the sensor and assign data logger wiring
terminals.
Short Cut
. It is included in
installations of
LoggerNet
,
RTDAQ
, or
PC400
.
The following procedure also describes using Short Cut to program the CS310.
1. Open
Short Cut
and click Create New Program.
2. Double-click the data logger model.
CS310 Quantum Sensor
2
