Campbell 9522B, Instruction Manual

Page: 41 / 48

D-1
Appendix D. Interfacing LoggerNet to
RUDICS
Contact Campbell Scientific if you are interested in using RUDICS.
D.1 Base Station System Requirements
1. LoggerNet software version 4.0 or greater
2. Telnet-compliant serial port redirector software
3. Iridium service account, supplied by Iridium service provider. You will
also need to make arrangements with service provider to access the
RUDICS network.
4. A PC with static IP internet access
5.
LoggerNet
and serial port redirector software should be referenced for
relevant PC hardware requirements
D.2 Remote Station Requirements
1. Datalogger configured as described in Section 4 , Datalogger
Configuration
(p. 10)
, Section 5.1.5 , Step 5: PakBusPort Configuration
(p.
16)
, and Section 5.1.6 ,
Step 6: CR1000 Configuration
(p. 17)
2. Datalogger program should include modem configuration (Section 6 ,
Remote Modem Configuration
(p. 18)
)
3. Modem configured as described in Section 3.2 , Setup of Iridium Modems
(p. 6)
D.3 Serial Port Redirector
To communicate with a remote datalogger using RUDICS, the computer
running LoggerNet must have Telnet-compliant serial port redirector software
installed (also known as a serial port to telnet emulator software).
Currently compatible software can be found here. The software version tested
at Campbell Scientific and known to operate is version 2.6.1.
www.fabulatech.com/serial-port-redirector.html
Campbell Scientific cannot guarantee that other versions of this
software will operate as intended in this application. Any support
will need to be requested directly of any third party software
provider.
Once the software is installed, click on the Add Client Virtual Port button to
create a connection to the RUDICS system. Fill in the information in the Add
NOTE