background image

Unpacking

After unpacking the unit, inspect
carefully for any damage that may
have occurred during transit. Make
sure to tighten fittings, bolts, etc.,
before putting unit into service. In case
of questions, damaged or missing parts,
please call 1-800-543-6400 for customer
assistance.

Have the date code, model number,
and parts list (with missing parts circled
before calling.)

Do not

operate

unit if damaged during shipping, handling
or use. Damage may result in bursting and
cause injury or property damage.

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.

Description

Oilless compressors are designed for
do-it-yourselfers with a variety of home
and automotive jobs. These units
operate without oil. Compressed air
from this unit will contain moisture.
Install a water filter or air dryer if
application requires dry air.

Safety Guidelines

This manual contains information that is
very important to know and understand.
This information is provided for SAFETY
and to PREVENT EQUIPMENT PROBLEMS.
To help recognize this information,
observe the following symbols. 

Danger

indicates

an imminently hazardous situation which,
if not avoided, WILL result in death or
serious injury.

Warning

indicates

a potentially hazardous situation
which, if not avoided, COULD result in
death or serious injury.

Caution

indicates

a potentially hazardous situation which,
if not avoided, MAY result in minor or
moderate injury.

Notice

indicates

important information, that if not
followed, MAY cause damage to
equipment.

CALIFORNIA PROPOSITION 65

This product or its power
cord contains chemicals
known to the State of
California to cause cancer
and birth defects or other reproductive
harm. Wash hands after handling.

You can

create

dust when you cut, sand, drill or grind
materials such as wood, paint, metal,
concrete, cement, or other masonry.
This dust often contains chemicals
known to cause cancer, birth defects,
or other reproductive harm. Wear
protective gear.

Operating Instructions

FP2090, FP2091, FP2094 Series

IN617403AV 1/10

Breathable Air Warning

This compressor/pump is not
equipped and should not be
used “as is” to supply breathing
quality air. For any application
of air for human consumption,
the air compressor/pump will
need to be fitted with suitable
in-line safety and alarm
equipment. This additional
equipment is necessary to
properly filter and purify the air
to meet minimal specifications
for Grade D breathing as
described in Compressed Gas
Association Commodity
Specification G 7.1 - 1966, OSHA
29 CFR 1910. 134, and/or
Canadian Standards
Associations (CSA).

DISCLAIMER OF WARRANTIES
In the event the compressor is
used for the purpose of
breathing air application and
proper in-line safety and alarm
equipment is not
simultaneously used, existing
warranties shall be voided, and
the Manufacturer disclaims any
liability whatsoever for any
loss, personal injury or damage.

STOP!

Oilless Compressors

DO NOT RETURN THE
PRODUCT TO THE
RETAILER! CALL 
1-800-543-6400

REMINDER: Keep your dated proof of purchase for warranty purposes!

Attach it to this manual or file it for safekeeping.

See Warranty on page 6 for important information about commercial use of this product.

© 2010

Record the Model No., Serial No. and
date of purchase located on the base
below the pump in the space below.

Model No. ____________________

Date Code ____________________

Date of purchase _________________

Retain these numbers for future
reference

.

Summary of Contents for FP2090 Series





















Reviews: