background image

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. 
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or 
property damage! Retain instructions for future reference.

REMINDER: Keep your dated proof of purchase for warranty purposes! 

Attach it to this manual or file it for safekeeping.

IN620503AV 11/15

See Warranty on page 12 for important information about commercial use of this product.

Operating Instructions and Parts Manual DC040000, 

HL540200, HL540210

© 2015 Campbell Hausfeld

A Marmon/Berkshire Hathaway Company

For parts, product & service information,

visit 

www.campbellhausfeld.com

Oil-Lubricated 

Compressors

Description

This oil-lubricated compressor is 
designed for do-it-yourselfers with a 
variety of home and automotive jobs. 
These compressors power spray guns, 
impact wrenches and other tools.  
Compressed air from this unit will 
contain moisture. Install a water filter 
or air dryer if application requires dry 
air.

Unpacking

After unpacking the unit, inspect 
carefully for any damage that may 
have occurred during transit. Make sure 
to tighten fittings, bolts, etc., before 
putting unit into service. In case of 
questions, damaged or missing parts, 
please call 1-800-543-6400 for customer 
assistance. Have the serial number, 
model number, and parts list (with 
missing parts circled) before calling.

DO NOT RETURN 
THE PRODUCT TO 
THE RETAILER!

 

Do not operate unit 

   if damaged during 

shipping, handling or use. Damage may 
result in bursting and cause injury or 
property damage.

READ & FOLLOW ALL INSTRUCTIONS

SAVE THESE INSTRUCTIONS

DO NOT DISCARD 

 Caution 

indicates 

 a potentially 

hazardous situation which, if not 
avoided, MAY result in minor or 
moderate injury.

 Notice 

indicates 

 important 

information, that if not followed, 
may cause damage to equipment.

NOTE:

 Information that requires special 

attention.

Safety Guidelines

This manual contains information 
that is very important to know and 
understand. This information is 
provided for SAFETY and to PREVENT 
EQUIPMENT PROBLEMS. To help 
recognize this information, observe the 
following symbols.

 Danger 

indicates 

 an imminently 

hazardous situation which, if not 
avoided, WILL result in death or 
serious injury.

 Warning 

indicates 

 a potentially 

hazardous situation which, if not 
avoided, COULD result in death 
or serious injury.

Breathable Air Warning 

This compressor / pump is not 
equipped and should not be 
used “as is” to supply breathing 
quality air. For any application of 
air for human consumption, the 
air compressor / pump will need 
to be fitted with suitable in-line 
safety and alarm equipment. 
This additional equipment is 
necessary to properly filter 
and purify the air to meet 
minimal specifications for 
Grade D breathing as described 
in Compressed Gas Association 
Commodity Specification 
G 7.1 - 1966, OSHA 29 CFR 1910. 
134, and / or Canadian Standards 
Associations (CSA).

DISCLAIMER OF WARRANTIES
In the event the compressor is 
used for the purpose of breathing 
air application and proper in-line 
safety and alarm equipment is 
not simultaneously used, existing 
warranties shall be voided, and 
the manufacturer disclaims any 
liability whatsoever for any loss, 
personal injury or damage.

STOP!

Record the Model No., Serial No. and 
date of purchase located on the base 
below the pump in the space below.

Model No.  ________________________

Serial No.  _________________________

Date of purchase  _________________

Retain these numbers for 

future reference.

Summary of Contents for DC040000





































Reviews: