background image

Operating Instructions

2

 

www.campbellhausfeld.com

GeneRal saFety

This product is a part of a high pressure 
system and the following safety 
precautions must be followed at all times 
along with any other existing safety rules.
1. Read ALL manuals included 

with this product carefully. 
Be thoroughly familiar with 
the controls and the proper 
use of the equipment.

2.  ONLY persons well acquainted with 

these rules of safe operation should 
be allowed to use the air tool.

 

Do NOT exceed maximum 
operating pressure of the air 
tool (90 pSI). The air tool COULD explode 
and result in death or serious personal 
injury. This can reduce the life of the 
tool. 

3. Do NOT exceed any pressure rating 

of any component in the system. 
Maximum operating pressure of 90 
PSI is measured at the tool inlet while 
the tool is running. The pressure drop 
between the compressor and tool 
needs to be compensated for at the 
compressor.

   

Release ALL pressure from 
the system before attempting 
to install, service, relocate or 
perform any maintenance.

MANUAL

Please read and save these instructions. Read carefully before attempting to assemble, install, 

operate or maintain the product described. Protect yourself and others by observing all safety 

information. Failure to comply with instructions could result in personal injury and/or property 

damage! Retain instructions for future reference.

4.  Disconnect air tool from air supply 

when not in use and before changing 
tools, attachments or performing 
service.

 

   

Safety glasses and ear 
protection MUST be worn 
during operation.

5. Do NOT wear loose fitting clothing, 

scarves, neck ties or jewelry when 
operating any tool. Loose clothing 
or jewelry may become caught in 
moving parts and result in serious 
personal injury.

6. Do NOT depress trigger when 

connecting air supply hose to tool.

7. Do NOT put hands near or under 

moving parts.

 

Excessive exposure 

  to vibration, 

working in awkward positions and 
repetitive work motions can cause injury 
to hands and arms. Stop using any tool 
if discomfort, numbness, tingling or pain 
occur and consult a physician.

8.  Check air hoses for weak or worn 

condition before each use. Make sure 
ALL connections are secure.

9.  Protect air lines from damage or 

puncture. Do NOT carry tool by air 
hose.

10. NEVER trigger the tool when 

not applied to a work object. 
Attachments MUST be securely 
attached. Loose attachments can 
cause serious injury.

11. ALwAYS use attachments designed 

for use with air powered tools. 
Do NOT use damaged or worn 
attachments.

General Safety 

Information (Continued)

Summary of Contents for CL154000AV

































Reviews: