__
5
__
Suggested Uses
Ground Pecan
or Walnut
Shells & Corn
Cob Meal
1-6"
Move gun back and forth over the template in a
brushing manner. Blast at a 90
°
angle. For fine polish-
ing, use glass beads for the abrasive. For drilling
holes, use 30 sieve sand
Sand
(30-50)
Glass Beads
Sand (40)
Ground
Walnut
Shells
Etching and
Drilling Holes in
Glass
1-4"
40-90
Antiquing
or Weathering
Wood
Use brushing strokes and watch the abrasion rate
carefully. Soft wood will wear faster than hardwood.
Smaller grit sizes give a smoother finish. Start with low
pressure and gradually build up pressure. Blast at a
45
°
angle
2-6"
40-90
Wood Sanding
and Refinishing
Furniture
Sand (50-100)
Glass Beads
Ground Walnut
Shells
Use brushing strokes and watch the abrasion rate
carefully. Use walnut shells for coarse finishing and
glass beads or fine sand for fine finishing. Blast at a
45
°
angle
40-70
Sand (20-40)
1-4"
50-125
Cleaning
Barbecue Grills
and Iron Pots
Use larger grit sand on a hidden area. If the base
material is being damaged, use a smaller grit. Blast
at a 80-90
°
angle
Cleaning
Automotive
Parts
Sand (20-40)
Aluminum
Oxide
1-4"
40-80
Be sure to mask any glass or painted surface that
could be accidentally damaged. Blast at a 80-90
°
angle
Cleaning
and Stripping
Masonry
Sand (20-40)
1-4"
50-125
Use a heavy grit sand with a sweeping overlapping
stroke. Blast at a 80-90
°
angle
1-6"
40-125
Use brushing strokes and watch the abrasion rate
carefully. Soft wood will wear faster than hard wood.
Smaller grit sizes give a smoother finish. Start with
low pressure and gradually build up pressure. Blast at
a 45-60
°
angle
Cleaning or
Preparing for
Paint
Sand (20-50)
Aluminum
Oxide (50-80)
Cleaning,
Stripping
Outdoor
Equipment
1-3"
50-125
Remove flaking paint first with wire brush, then sand-
blast with a heavy grit abrasive. Multiple layers of old
paint should be scraped first. Prime immediately
following sandblasting to prevent corrosion. Blast at
a 45-60
°
angle
TYPE OF
DISTANCE
ABRASIVE
APPLICATION
FROM
PSI
SUGGESTIONS
(SIEVE/SIZE)
WORK
IN241900AV
MODELS AT125102AJ, AT121002AJ AND AT121102AJ
Technical Service
For information regarding the operation or repair
of this product, please call 1-800-543-6400 be-
tween 8 a.m. and noon or between 1 p.m. and 5
p.m. (EST), Monday through Friday for assis-
tance. If you are calling from Ohio or outside the
continental United States, please call collect, 1-
513-367-1182.
Please provide following
information:
• Model Number
• Serial Number (if any)
• Part Description and Number
as shown in Parts List.
Address parts correspondence
to:
Campbell Hausfeld
100 Production Drive
Harrison, Ohio 45030
