background image

__ 

__

Operation

Sand

(20-40)

General purpose use. Removing light rust and paint from metal, wood or other surfaces; wood
finishing; metal cleaning; glass and stone etching; hole drilling in glass; brick or cement block
cleaning; brass and silver cleaning; light brick cleaning; exterior automotive parts cleaning;
light stone and cement removal and water deposit removal.

Sand

(50-100)

Use for a fine polish finish or antique wood finish, brass and silver polishing, automotive parts
cleaning and polishing, sheet metal surface polishing, and fine glass etching.

Heavy rust removal and rough surface paint removal

Aluminum Oxide

Corn Cob Meal

Wood cleaning (fine)

Wood cleaning (coarse)

Walnut or

Pecan Shells

(Ground)

TYPE OF

ABRASIVE

APPLICATION

(SIEVE/SIZE)

NOTE: Abrasive media that has not been cleaned and screened should be avoided, because the media could contain
material that will clog the gun.

IN241900AV

MODELS AT125102AJ, AT121002AJ AND AT121102AJ

Limited  Warranty

1. DURATION:

 One year from the date of purchase by the original purchaser.

2. WHO GIVES THIS WARRANTY (WARRANTOR):

Campbell Hausfeld
The Scott Fetzer Company
100 Production Drive
Harrison, Ohio  45030
Telephone: (513) 367-4811

3. WHO RECEIVES THIS WARRANTY (PURCHASER):  

The original purchaser (other than for purposes of resale) of the Campbell Hausfeld product.

4. WHAT PRODUCTS ARE COVERED BY THIS WARRANTY: 

Any Campbell Hausfeld portable air compressor, air tool or supplementary air accessory

supplied or manufactured by Warrantor.

5. WHAT IS COVERED UNDER THIS WARRANTY: 

Defects on material and workmanship which occur within the duration of the warranty period.

6. WHAT IS NOT COVERED UNDER THIS WARRANTY:

A. 

Implied warranties, including those of merchantability and FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO ONE YEAR FROM THE DATE

OF ORIGINAL PURCHASE. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.

B. 

ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE, OR

MALFUNCTION OF THE CAMPBELL HAUSFELD PRODUCT. Some states do not allow the exclusion or limitation of incidental or consequential damages,
so the above limitation or exclusion may not apply to you.

C. 

Any failure that results from an accident, purchaser’s abuse, neglect or failure to operate products in accordance with instructions provided in the owner’s

manual(s) supplied with product.

D. 

Normal adjustments which are explained in the owner’s manual(s) provided with the product.

E. 

Items or service that are normally required to maintain the product, i.e. lubricants.

7. RESPONSIBILITIES OF WARRANTOR UNDER THIS WARRANTY: 

Repair or replace, at Warrantor’s option, products or components which have failed

within duration of the warranty period.
8. RESPONSIBILITIES OF PURCHASER UNDER THIS WARRANTY:

A. 

Deliver or ship the Campbell Hausfeld product or component to the nearest Campbell Hausfeld Authorized Service Center. Freight costs, if any, must

be borne by the purchaser.

B. 

Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s).

9. WHEN WARRANTOR WILL PERFORM REPAIR OR REPLACEMENT UNDER THIS WARRANTY:

A. 

Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of

replacement parts.

B. 

If the purchaser does not receive satisfactory results from the Authorized Service Center, the purchaser should contact the Campbell Hausfeld Product

Service Department (see paragraph 2).

This Limited Warranty gives you specific legal rights and you may also have other rights which vary from state to state.

Printed in Taiwan

Summary of Contents for AT125102AJ









Reviews: