background image

__ 

__

READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT
DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COM-
PLY  WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.

Description

Campbell Hausfeld sandblasting equipment is designed
for cleaning and removing rust, scale, paint, grime and
dirt for stripping, polishing and etching projects. This
equipment  can be used with sand, abrasive powders,
or water and other liquids.

Unpacking

After unpacking the sandblasting kit, carefully inspect
for any damage that may have occurred during transit.
Check for loose, missing or damaged parts.

General Safety Information

1. Read this instruction manual before installing this

device to the compressor pump.

2. Safety glasses or face shield, gloves and a respirator

must be worn during operation. Always work in a well
ventilated area.

3. During operation, do not expose the hands or skin

directly in the line of the blast nozzle.

4. After installation, inspect to make sure all compo-

nents seal properly.

5. Keep children away at all times. All visitors must be

kept a safe distance and wear safety glasses, gloves
and a respirator.

6. Do not exceed the maximum operating pressure  of

the sandblasting equipment (125 PSI).

DISCONNECT THE SANDBLASTER FROM THE
AIR SUPPLY BEFORE CHANGING ACCESSORIES
OR ATTEMPTING TO INSTALL, SERVICE, RELO-
CATE OR PERFORM ANY MAINTENANCE.

WARNING

!

!

WARNING

!

!

Figure 3

DANGER

!

Figure 2

WARNING

!

!

7. Check hoses and air lines for weak or worn condition

before each use. Make sure all connections are
secure before use.

DO NOT POINT THE SANDBLAST GUN AT ANY-
ONE OR OBJECTS OTHER THAN THE INTENDED
WORK OBJECT.

8. Do not depress the trigger when connecting the air

supply hose.

DO NOT WORK AROUND OILY RAGS OR FLAM-
MABLE LIQUIDS. SAND STRIKING METAL CAN
CAUSE A SPARK AND CREATE A FIRE OR EX-
PLOSION.

DO NOT SPRAY ACIDS OR CAUSTICS.

Copyright 1993, Campbell Hausfeld/Scott Fetzer Company

Figure 1

IN241900AV

1/93

OPERATING INSTRUCTION MANUAL

SANDBLASTING KITS

MODELS AT125102AJ, AT121002AJ, AND
AT121102AJ

CAMPBELL

HAUSFELD

Summary of Contents for AT125102AJ









Reviews: