FT-30 Palazzo Urn Fountain
Assembly Instructions
BOTTOM OF URN (FT-30A)
Step 9 - Use another hose clamp to secure the other end of the 30" non-kink tubing to the pipe
protruding from the CENTER of the urn (FT-30A).
Step 10 - Center the urn (FT-30A) over the column (FT-30B).
INSIDE OF URN (FT-30A)
Step 11 - Place a copper sleeve over each of the copper pipes inside the urn (FT-30A).
Step 12 - Place the 8" copper pipe over the pipe protruding up from the CENTER of the urn
(FT-30A).
12a - If a spray head is desired, place the third copper sleeve over the 8" copper pipe that
is centered inside the urn and place the spray head onto the copper sleeve.
Step 13 - Place the 6½" copper pipe over the remaining pipe protruding off-center inside the urn.
Step 14 - Place the pump cover door (FT-29B/30CC) in the pump access opening of the pump
cover (FT-29B/30C).
Step 15 - Fill the basin with water.
FT-30A (134 lbs)
18"L x 18"W x 21"H
FT-29BB/30CC (4 lbs)
5"L x 1"W x 5"H
