FT-310 Juliet Fountain
Revised June 26, 2017
Assemble your fountain on a level surface capable of holding a minimum of 215
pounds with an approximate 1 square foot footprint.
FT-310C (174 lbs)
27.25”L x 24.75”W x 37”H
FT-310B (3 lbs)
8.25”W x 2”H
FT-310A (3 lbs)
7.25”W x 3”H
1.
Position the basin (FT-310C) where the fountain is
to be installed, ensuring that it is level.
2.
Assemble the pump kit
a.
Connect the tubing to the pump outlet.
b.
Place the stopper around the pump cord
approximately 6” from the pump.
3.
Feed the pump cord through the hole and channel in
the basin (FT-310C).
4.
FIRMLY press the stopper into the hole evenly.
a.
Note: Using the handle of a screwdriver or
hammer works best to press the stopper in
place.
5.
Place the Pump House Ring (FT-310B) inside of the
basin, ensuring that it is centered and level.
6.
Holding the water feature disc (FT-310A) over the
basin, insert the PVC connected to the non-kink
tubing into the PVC coupling protruding from the
bottom of the disc.
7.
Carefully place water feature onto the Pump House
Ring (FT-310B) ensuring that it is centered and
level.
8.
Fill the fountain with water.
