FT-381 Salinas Pebble Fountain, Low
Assembly Instructions
Assemble your fountain on a level surface capable of holding a minimum of
80 lbs with
an approximate 1.25 sq. ft. footprint (actual dimensions 13.5" Diam.).
Step 1 -
Position the basin (FT-381B) where the fountain is to be installed, ensuring that it is level.
Step 2 -
Assemble the pump kit:
2a -
Using a hose clamp, attach the 1/2" non-kink tubing to the pump outlet.
2b -
Place the stopper around the pump cord approximately 6 inches from the pump.
Step 3 -
Feed the pump cord through the hole in the basin (FT-381B) and out of the channel.
Step 4 -
FIRMLY press the stopper into the hole evenly.
4a - Note: Using the handle of a screwdriver or hammer works best to press the
stopper in place.
FT-381B (57 lbs)
13.5"W x 10.5"H
Step 5 -
Insert the CPVC end of the tubing assembly into the coupling at the bottom of the water
feature (FT-381A).
Step 6 -
Place the water feature (FT-381A) into the basin (FT-381B) ensuring that it is level.
6a -
Turn the feature and coil the tubing as you lower it into position.
Step 7 -
Fill the fountain with water.
Step 8 -
Evenly spread the pebbles over the water feature.
FT-381A (6 lbs)
11.75"W x 1"H
