Campania International FT-319 Assembly Instructions Download Page 3

Page: 3 / 4

FT-319 M-Weave Fountain

Assembly Instructions

FT-319B (2 lbs)

13.75"L x 2.25"W x 0.75"H

Step 8 -

Place the water feature (FT-319A) on top of the pump cover and ensure that the pump

cord exits through the hole provided.

Step 9 -

Insert the CPVC pipe attached to the preassembled tubing into the coupling protruding

from the bottom of the water feature (FT-319A).

Step 10 -

Place the spiller stopper (FT-319B) inside the top of the water feature (FT-319A).

Step 11 -

Place the pump cover door (FT-319D) in the pump access opening of the pump cover

(FT-319C).

Step 12 -

Fill the fountain with water.

FT-319A (192 lbs)

16.75"L x 5.5"W x 27.5"H

FT-319D (2 lbs)

5.25"L x 0.75"W x 3.5"H

Summary of Contents for FT-319

Page 1: ...ft cord length Tools Required Bubble Level Screwdriver Pump Kit Parts List Image Component Quantity PK300 Pump Use adapter indicated 1 7 Drain Stopper 1 Approx 8 length of 1 2 black non kink tubing 1...

Page 2: ...a hard packed gravel pad If the base is level but some components seem off rotate components or use wedges to level them Step 3 Create a Drip Loop To prevent water from dripping down the cord and dama...

Page 3: ...rt the CPVC pipe attached to the preassembled tubing into the coupling protruding from the bottom of the water feature FT 319A Step 10 Place the spiller stopper FT 319B inside the top of the water fea...

Page 4: ...s completely seated in the fountain You can also use 100 pure clear silicone to ensure a proper seal is achieved Step 4 Cracking Your fountain may be cracked from improper winter care see Winter Care...