Campania International FT-288 Assembly Instructions Download Page 3

Page: 3 / 4

FT-288 Falling Water IV Fountain

Assembly Instructions

Step 7 - Place the water feature (FT-287A) on top of the pump cover and ensure that the pump

cord exits through the hole provided.

Step 8 - Insert the 2" CPVC end of the tubing assembly into the coupling protruding from the bot-

tom of the water feature (FT-287A).

Step 9 - Using the silicone provided, secure the copper spiller to the top lip of the water feature.

FT-287A (134 lbs)

10"L x 7.5"W x 25"H

Step 10 - Place the spill stop (FT-287B) inside the top of the water feature.

FT-287B (4 lbs)

6.5"L x 4"W x 1"H

Step 11 - Place the pump cover door (FT-287D) in the pump access opening of the pump cover.

Step 12 - Let the fountain site 24 hours before filling with water to let the silicone dry completely.

FT-287D (4 lbs)

6.75"L x 1.5"W x 3.25"H

Summary of Contents for FT-288

Page 1: ...Tools Required Bubble Level Screwdriver Pump Kit Parts List Image Component Quantity PK300 Pump Use adapter indicated 1 12 length of 1 2 non kink hose 1 2 length of 5 8 clear vinyl tubing 1 2 piece of...

Page 2: ...tain Step 2 Check Foundation Place your fountain on a level surface It is recommended to place your fountain on concrete or a hard packed gravel pad If the base is level but some components seem off r...

Page 3: ...water feature FT 287A Step 9 Using the silicone provided secure the copper spiller to the top lip of the water feature FT 287A 134 lbs 10 L x 7 5 W x 25 H Step 10 Place the spill stop FT 287B inside...

Page 4: ...s completely seated in the fountain You can also use 100 pure clear silicone to ensure a proper seal is achieved Step 4 Cracking Your fountain may be cracked from improper winter care see Winter Care...