Campania International FT-286 Assembly Instructions Download Page 3

Page: 3 / 4

FT-286 Falling Water I Fountain

Assembly Instructions

Step 7 - Place the water feature (FT-286A) on top of the pump cover (FT-286C) and ensure that the

pump cord exits through the hole provided.

Step 8 - Insert the 2" CPVC end of the tubing assembly into the coupling protruding from the bot-

tom of the water feature (FT-286A).

Step 9 - Using the silicone provided, secure the copper spiller to the top lip of the water feature.

FT-286A (171 lbs)

21"L X 8.25"W x 15.5"H

Step 10 - Place the spiller stopper (FT-286B) inside the top of the water feature (FT-286A).

FT-286B (6 lbs)

17.5"L X 4"W x 1"H

Step 11 - Place the pump cover door (FT-286D) in the pump access opening of the pump cover

(FT-286C).

Step 12 - Let the fountain sit 24 hours before filling with water to let the silicone dry completely.

FT-286D (4 lbs)

7"L X 1.25"W x 4.75"H

Summary of Contents for FT-286

Page 1: ...it Parts List Image Component Quantity PK500 Pump Note use the smallest adapter 1 12 length 1 2 non kink hose 1 2 length 5 8 clear vinyl tubing 1 2 piece of 1 2 CPVC pipe 1 2 8 oz tube of silicone 1 F...

Page 2: ...heck Foundation Place your fountain on a level surface It is recommended to place your fountain on concrete or a hard packed gravel pad If the base is level but some components seem off rotate compone...

Page 3: ...eature FT 286A Step 9 Using the silicone provided secure the copper spiller to the top lip of the water feature FT 286A 171 lbs 21 L X 8 25 W x 15 5 H Step 10 Place the spiller stopper FT 286B inside...

Page 4: ...s completely seated in the fountain You can also use 100 pure clear silicone to ensure a proper seal is achieved Step 4 Cracking Your fountain may be cracked from improper winter care see Winter Care...