FT-143 Provence Fountain
Assembly Instructions
Three people are recommended for the installation of this fountain!
Assemble your fountain on a level surface capable of holding a minimum of 1,069 lbs with an
approximate 10.5 sq. ft. footprint (actual dimensions 43" x 43").
Step 1 - Place the basin (FT-143E) into position where the fountain will be installed, ensuring that
it is level.
Step 2 - Assemble the pump kit:
2a - Fit the 3/4" clear end of the tubing assembly to pump outlet.
2b - Place the stopper around the pump cord about 8" from the pump.
Step 3 - Feed the pump cord through the hole in the basin (FT-143E) and the channel.
Step 4 - FIRMLY press the stopper into the hole evenly.
4a - Note: Using the handle of a screwdriver or hammer works best.
FT-143E (550 lbs)
46"L x 46"W x 11"H
Fountain Set-Up:
Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is
installed properly, please read our instructions and tips before you begin.
Step 1 - Seek Professional Help: Check if professional installation is recommended for your fountain.
Step 2 - Check Foundation: Place your fountain on a level surface. It is recommended to place your fountain on concrete or a hard packed
gravel pad. If the base is level but some components seem off, rotate components or use wedges to level them.
Step 3 - Create a Drip Loop: To prevent water from dripping down the cord and damaging the electrical socket, create a drip loop by allowing
the pump power cord to fall below the wall outlet.
Step 4 - Use a GFCI Outlet: Use only a GFCI outlet when running a fountain.
Step 5 - Place the pump house (FT-143C) over the pump and in the center of the large basin (FT-
143E).
FT-143C (58 lbs)
13.5"L x 13.5"W x 8"H
Step 6 - Position the feature column (FT-143B) over the pump house (FT-143C).
Step 7 - Insert the CPVC pipe connected to the tubing assembly into the pipe protruding out of the
bottom of the feature column (FT-143B).
FT-143B (150 lbs)
10"L x 10"W x 28"H
